FAQ

Can I apply Solacoat myself?

Solacoat applies like normal paint using a brush, roller or airless spray equipment ( with a 17/18 "thou" tip.) This can be hired from most equipment hire businesses and saves a massive amount of time/effort and ensures an even spread rate. A days hire is about $150, which should be just about enough to apply one undercoat and two Solacoat in one day if planned. However, you need to make sure the surface is properly prepared...high pressure clean to remove dirt , mould etc, address any rust.. refer application instructions.

What is the spread rate?

Because of confusion over different paint thicknesses, it is more relevant to quote how much paint is required for the job. Read the application instructions but the following is a guide. The Primers will cover approx 10 square metres per litre - a 15 litre drum will cover approx 150m² of flat surface. A 15 litre drum of Solacoat will cover with 2 coats 105m² of Flat surface and 75m² of Corrugated. Allow a bit more for porous and high profile surfaces. Refer instructions.

How long will it last?

Coolshield provides a 10 year warranty on the surface integrity and performance, if applied according to instructions. Our longest standing jobs in Alice Springs are still preforming after 18 years.

Can I paint over existing painted surfaces?

Yes. Just make sure the surface is sound with proper preparation. Refer application notes.

How much will the temperature drop inside?

This depends on location, surface material, its colour and degree of degradation etc etc...as well as other design factors, windows etc. For metal roofs that can reach a Hot 90°C, the application of Solacoat will bring the temperature to within 4-5°C of ambient for example on a 34°C day the temperature of the roofing material will be approx 38°C. The temperature drop could be as much as 15°C inside. There are a number of testimonials that state such figures. We have reduced the temperature of diesel in a tank by over 30°C...and the surfaces cool down at night. University research shows that heat ingress is reduced to approx 20% against some other roofing materials as high as 90%. Refer Research.